$1,400 · Logan 10" Metal Lathe

Lightly used metal lathe in remarkable condition, especially considering that it is ~ 80 years old. If I had the space I would keep it. It’s a great example of quality that lasts. There is power feed on both horizontal and longitudinal axis, back gear, a couple of extra change gears, 3 jaw chuck, carbide tooling, live centre, drill chuck and key. The tailstock has an MT 2 taper. The headstock has a spindle bore of 25/32" and the bearings are high speed, pre loaded ball bearings suitable for carbide tooling. It is mounted on a wood base and powered by a 220 volt variable speed motor with digital speed control. If you do not have 220 power, I can provide a transformer for a nominal charge. Including the base, the dimensions are 48" long, 30" wide by 31" tall.