$350 · Fire Eye Red Eye Twin

Fire Eye Red Eye Twin As new in Box The Red-Eye Twin Instrument Preamp offers a simple, one-box, direct-connect solution for musicians who play two instruments at the same gig or have an instrument with dual pickups. The Red-Eye Twin works well with instruments having passive or active piezo pickups, electret microphones or magnetic pickups such as electric guitars and basses. Performers that find the Red-Eye Twin useful are, for example, those playing fiddle and mandolin, guitar and mandolin, string bass and electric bass or dual pickup instruments. The Red-Eye Twin’s impedance-matching field-effect transistor input circuit is designed especially to match and track the impedance of passive piezoelectric pickups. That results in a smooth, natural, acoustic instrument tone. Low distortion, low noise, and generous headroom mean that clear tone comes through even when an instrument is played percussively and loudly. Features: · Input: Impedance-matching, accepts 2 volt peak-to-peak level without distortion. · Low-impedance, balanced, XLR output, 600 ohms, will drive long cables to mix-board. · XLR Ground Lift Switch to help isolate AC power ground loop hum. · A / B Button selects alternate input. Mode Switch allows playing alternate inputs or both. · Separate Treble and Gain controls for each input. Treble is flat when Control is centered. · Boost Button with Boost Gain control for amplifying solos. · Switch converts B-Channel Input to Phantom Powered electret microphone input. · Runs on 48V XLR Phantom Power, 9-18V Pedal Board Power, or 9V Battery Power. · Uses the battery only if other power sources are not available. · Plugging an instrument in or connecting external power turns the Red-Eye on. · Pwr Chk Light illuminates for about a second if power is good when the preamp is powered up. When powered up on the battery, the light appears if the battery is in the first ¾ of its life. · ¼ inch output and input for accessory loop, suitable for stomp-tuners or effects pedals or for output to on-stage guitar amps or PAs. · Internal filtering to reject radio-frequency interference from neon lights and cell phones. · Small Chassis Size: 1.25 x 3.5 x 4.5 inches. Weight: 18 ounces.