Mounted on a solid wood stand. The lathe comes with 4 jaw chuck, inboard faceplates, drill chuck, live centre, pin centre, spur drive and screw drive. The lathe is powered by a 220 volt 1/2 hp 3 phase motor with 220 volt VFD. There are 3 speed ranges: 0 to 800 rpm, 0 to 1350 rpm and 0 to 2250 rpm. The VFD offers dial up speed control within each range, forward/reverse and braking. Emergency stop switch is also wired in. The headstock is indexed with pin. The headstock and tailstock both have morse 2 tapers. The lathe is like new. All you need is 220 volt power and you have an exceptional lathe.