$4,999 · Proac D38r

Rarely offered in North America this Top of the line Proac speaker will not disappoint you. Their sound is open Airy and with detail and a tight authoritative bottom end. Proac’s are extremely well regarded throughout the world as audiophile grade speakers. The D38R retailed for $12,000.00 when new. DESCRIPTION Nominal Impedance 4 ohms Recommended Amplifiers 10 to 250 watts Frequency Response 20hz to 30Khz Sensitivity 90db linear for 1 watt at 1 metre Bass/Midrange (2) Driver 6 1/2" ProAc unit with coated polypropylene cone on die-cast chassis Tweeter ProAc 1" soft dome with special surround and inner damping Crossover HQC crossover using dedicated components and wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring and bi-amping. Dimensions 49" high on plinths with conical feet 9 1/4 " wide 13 1/2 " deep Weight 88 lbs/cabinet Mode Floorstanding Grill Acoustically transparent crimplene Cabinet size is the only feature the ProAc Response D38R floorstanding speakers have in common with its predecessor, the highly regarded ProAc Response 3.8. Internally, everything has been changed to produce a dynamic new level of performance with vastly increased efficiency and sensitivity whilst retaining all the virtues of the earlier model. Good quality valve or Class A transistor amplifiers with an output as low as 10 watts will produce fine results from these exciting new ProAc Response D38 Ribbon tweeter loudspeakers. The ProAc Response D38-R speaker cabinets themselves, handcrafted and finished in real wood veneers, are extremely rigid and well damped to minimise colouration. The ProAc Response D38R speakers are reconfigured internally with a new porting system similar to that used on the flagship D100 model, loading for the bass drivers is now provided through a large port which pressurises the air between the cabinet and the plinth, releasing the air through side vents. This method of coupling makes room placement less critical. With the ProAc Response D38R speakers a new generation of extremely sensitive drive units has been introduced which includes two new polypropylene coated bass/midrange units built by one of the UK’s leading studio manufacturers. There are however some enthusiasts who have preferences for different designs of tweeter to cover high frequencies. The ProAc Response D38R speakers ribbon tweeter (light as a human hair) is one of the most popular; these tweeters offer an alternative to dome tweeters. The ProAc Response D38 Ribbon tweeter speakers also come with a crossover upgrade to match the new ribbon. The end result is the ProAc Response D38R giving the same performance in the bass and midrange of the ProAc D38 but with the benefit of a ribbon tweeter. New Ribbon tweeter (light as a human hair) New Sophisticated HQC crossover upgrade network and ProAc oxygen-free wiring to match the new ribbon tweeter Real wood veneers, are extremely rigid and well damped to minimise colouration Reconfigured internally with a new porting system similar to that used on the flagship Response D100 mode Loading for the bass drivers is now provided through a large port which pressurises the air between the cabinet and the plinth Two 8″ polypropylene coated bass/midrange units, built by one of the UK’s leading studio monitor manufacturers Auditions welcome in Victoria BC