For sale is a factory refinished 1997 Marinoni Estasi Steel Frame and Carbon Fork. It was a project bike that I no longer have the time to complete. This bike is made from Columbus Neuron tubing and was offered with a 9-Speed Dura-Ace 7700 when first sold from Oak Bay Bicycles in 1997. This means that the rear spacing is suitable for a 10 or 11 speed groupset without stretching the frame. The red colour is not the original paint scheme but represents a standard colour offered on the Estasi in 1997. The frame weighed 4.0lb before paint. The fork is a carbon Columbus Minimal fork with a 1-inch steerer. The Minimal is a monocoque carbon fork designed for frames with traditional steerers. I'm also including a Thomson Elite 26.8 x 330 mm Seatpost with the frame and fork. I've also included the factory refinishing bill of sale. At this point I'm into this bike for at least $850. A brand new Marinoni frame and fork will cost you $1375. Measuring from the centre of the seat tube along the top tube to the centre of the head tube is 54.5cm. Measuring from the centre of the bottom bracket along the seat tube to the top of the top tube is 55cm. The headtube measures 128mm. Will fit a 25mm tire no problem. Please note, this is not the original fork. The original fork for this specific bike was actually Columbus EL, although this model typically came with a matching Columbus Neuron fork.