Mint Condition RC Helicopter Helicopter is 5 feet 2 inches long from blade to blade. Large HELI. - 1 Align TRex 600E CF Helicopter (FlyBar System) - 1 Tail Gyro - 4 Futaba Servos - 4 Carbon Fiber Blades - 1 EMax 150A ESC (Brand New) ~Alarm Sounds if NO Signal from Receiver. - 2 Gens Ace 5500mAh 45C LiPo Battery (Brand New) $100x2 - 1 Battery Y Cable - 2 LiPo LED/LCD Battery Alarm SET: 3.5-3.9V ~2 LCD Screens Read Battery Cell V. ~2 RED LED Flash Rapidly upon Set Low Voltage. ~4 Audible Alarm Sound Rapidly upon Set Low Voltage. - (ECU) ~Large LCD display reads onboard data from sensors and Monitors (Humidity/Temperature/Altitude/Battery Monitor) to Transmitter. ~Displays Battery Voltage and mAh Total. - 1 Navigation Light System ~Direction lights integrated in skids and tail wing. ~Top and Bottom White Pulsating (Fast Blink) ~Bottom and Tail Red Becons (Slow on/off dim) - Lidar 3D mapping and Sonar integrated. ~Bootup sequence laser is initiated with landing lights, distance Becon emitter and audible/visual alarm. ~4 Landing lights are activated automatically upon set distance from ground. ~Laser is activated automatically upon set distance from ground. ~Audible Alarm is activated automatically upon set distance from ground. ~Multi color LED Visual Alarm is activated automatically upon set distance from ground (SOLID Green - Flashing Red). ~ Set Course/Distance can hover automatically. - 2 Front Landing Lights & 1 Rear Landing Light activated with Receiver Control Switch. - All external wires are encased or housed in aluminum tubing. Looks factory made. - Lights to tail and wing section have been housed in aluminum tubing within the aluminum shaft (no interference with tail rotor drive). - Systems easily turn on/off from seperate switches. - 3 additional channels within ECU are open for additional sensors or output devices. - 2 FiberGlass Body's - Transmitter $400