This is a project I started but sadly have lost interest in finishing it.the truck was running and driving , but it got real close to a shop fire that blew out the back windows which warranted cutting the roof off . I shortened the tub approx 8 " for less overhang, so truck will need a fuel cell as stock tank was removed for the shorten of tub . Both frame rails need a 12" repair at rear leaf hanger . Doors/fenders/tailgate are all in pretty good condition with minimal rust . Cruiser has 2x4 box tube welded in to rockers for sliders. Drivers side piece yet to be installed. I had planned on a spring over with a shackle reversal in the front w/drop hanger. I have cut and made the pieces for drop hanger still needs to be welded and installed. I have f 150 rear leafs for the front and 63" Chevy leafs for the rear. Also have a set of 36x12.5x15 TSL swampers on 15" steel wheels. Comes with spare pass door w/glass only and another complete stock cross over steering . I am located in French beach which is approx 20 mins past sooke Let me know if u have any questions