PRIVATE SALE ADVENTURER 90FWS VERY CLEAN STORED INSIDE MUSTSEE NOT A RENTAL UNIT HAS EASY STEP BUMPER 2 AWNINGS ONE OUT THE REAR AND ONE ON SIDE OF CAMPER 1 Our composite fiberglass walls are constructed by laminating a welded aluminum tube frame between an outer Filon(TM) shell and an inner luan laminated wood panel. The void created by these two panels is filled with a solid styrofoam insulation. 2 All units use flush-frame safety glass radius windows with gusseted corners. Solar Reflective windows are standard on the 810WS & up. 3 The heated enclosed holding tank area is insulated with reflectics. Heat ducts in the holding tank area ensure a warm area when the furnace is in operation, leaving the zone warm & dry at all times. 4 A sturdy powder coated aluminum ladder provides easy access to the roof. 5 Generous exterior storage space. Cross Section Framing an Adventurer truck camper is a craft in itself. All materials are pre-cut and hand assembled without the use of jigs to provide a tighter, stronger fit at all of the joints. 6 Tie-down brackets are bolted to the main wall and wing wall for extra reinforcement and strength. 7 Our jacks are bolted through the aluminum corners to achieve a strong and stable platform when the camper is not on the truck. OPEN TO REASONABLE OFFERS