Mark 1 Unit 0 Harken furling gear.
Drum assembly, integral turnbuckle, 7/16" diameter toggle, torque tube, halyard swivel.
Approximately 37-1/2 feet total length, but the top 4-inches or so of the foil is damaged with top cap missing, as shown in the pictures. Forestay still installed but top portion damaged as well. Foil would have to be trimmed back to a shorter length and new forestay installed. However, when it was disassembled, there was some spare foil length under the bottom collar. Also at the time it was replaced spare foil sections were available locally and several riggers indicated that they had the required foil connectors in stock and had solutions to replace the top cap.
The Mark 1 Unit 0 will work with forestay diameters of 5/32, 3/16 or 7/32 inch (4, 5 or 6mm) and is designed for boats in the range of 22 to 30 feet. This model uses screws rather than the annoying drive pins to secure the foil sections and has the independent top and bottom swivels, allowing you to reef with decent sail shape (compared to the cheaper 'cruising models').
The furler is date stamped 1993 but the rigger who installed my new unit deemed this one to be in very good condition.
Located 5-minute walk from Westport Marina, for easy transport to your boat.
Please respond with a phone number. Recently many of my responses to inquires have been directed to junk mail folders.
|Last hour||Last 24 hours||All|